High-quality natural anhydrite used as a basic substance for building products. Pack sizes:
...
Products
Casufill A5 is a very fine milled natural anhydrite without any additives. Casufill A5 is used for b...
High-quality natural anhydrite used as a basic substance for building products. Pack sizes:
...
Raddipur is pure calcium sulfate and it is produced as thermal Anhydrite based on FGD-gypsum. Raddip...
Gypsum mortar, can be spread with all known plastering machines.
For interior use as a render, s...
Gypsum-base mortar developed for painters and decorators, suitable for thicknesses of 5 to 30 mm, fo...
Gypsum mortar, suitable for thicknesses of 6 to 40 mm, highly adhesive plaster for manual applicatio...
Danish white cement EN - 197-1 - CEM I 52,5R grade. Fast-setting Portland cement in bright white col...
High Performance, Low CO2 Footprint.
With its high standards of performances and consistent rheolog...
Solvent-free, alkali-resistant deep primer. Due to its high penetrating ability, it stabilizes porou...
Used to produce moulding plasters for rotary and roller moulds. Pack sizes:
1 x
25 kg
40 ...
Cement base dry-set mortar for smoothing, frost-proof, for exterior and interior use, suitable for t...
Anhydrite-base, can be applied manually or by using power equipment, for thicknesses of 2 to 15 mm.
...
Floor screed for thicknesses from 10 to 30 mm Anhydrite-base, can be applied manually or by using po...
Fast setting binding plaster.
For installation and fitting works
Suitable for household fittin...
Grade G4/A2 gypsum plaster of natural origin from Romania, for use in buildings and other constructi...
Fibre-reinforced non-shrinking joint compound.
Perfectly suitable for manually sealing and cover...
Ready-mixed, extra white plaster of Paris.
For plastering works and for filling gaps and cracks
...
Special drywall adhesive.
Suitable for the adhesion of plasterboards, gypsum fibres and other gy...
Slovakian white cement, CEM I 52.5 N grade.
For making topcoat plasters
For manufacturing dryw...
Spezial 40W is a high-quality casting plaster. Suitable for making moulds, building ornaments and ce...
Spezial 58-48 is a high-quality casting plaster. For making ceramics, building ornaments and statues...
Spezial TS is a very fine grade alpha-hemihydrate with high pureness on basis of natural gypsum.
Sp...
These plasters adapt perfectly to any requirements. They are used in the ceramic industry to manufac...
Suitable for thicknesses of 0 to 10 mm, can be used for different purposes, extra white skimming pla...
